On May 23, 2018, we published revised versions of our Privacy Policy and User Agreements. Please read these updated terms and take some time to understand them. Your use of our services is subject to these revised terms.
Yes, I Agree.

Sigma Labs Inc. (NASDAQ: SGLB) is “One to Watch”

  • Provider of revolutionary quality assurance software to the commercial 3D printing industry under the PrintRite3D® brand
  • Estimated addressable market is $1.4 billion, projected to exceed $3.9 billion by 2023
  • Currently, there are 23 Sigma Lab installations across 19 different users located around the globe
  • Evaluations are underway with Tier-1 OEM clients for potential production-level software integration
  • Experienced management team with deep industry experience, supplemented by an industry leading scientific advisory board
  • Robust patent strategy established to protect intellectual property with seven patents granted, 18 patents pending, and four patent applications pre-publication

Sigma Labs Inc. (NASDAQ: SGLB) is the only provider of in-process quality-assurance software to the commercial 3D printing metal industry that enables operators of machines making 3D metal parts to offset emerging quality problems, sustain part quality, and avoid rejects. Sigma’s software is the singular solution that enables both real-time, in-process detection of quality control manufacturing irregularities for critical metal parts and then provides the operator the actionable information needed to adjust and mitigate the developing anomaly. Sigma Labs’ software represents a paradigm shift in the quality control process for the manufacture of 3D printed metal components. The nascent 3D metal printing industry is on the verge of radically altering the speed and technical complexity of manufactured parts. Further, it makes possible just-in-time availability of critical components – all at reduced cost, time, waste and weight. 3D printing, heralded as the fourth industrial revolution in manufacturing, will only truly surpass traditional techniques when the additive manufacturing industry moves from “post process” quality control to “in process” quality assurance.

For the industry to move from prototype manufacturing of critical components to economically viable commercial production, the 3D metal printing industry must find ways to dramatically increase production speed and quality yields, and to dramatically decrease the excessive cost of quality control. To achieve these prerequisites and move 3D metal printing into the mainstream, parts must be inspected and certified during the manufacturing process rather than after. Parts in the production process that are developing signs of quality control problems must be identified in real-time and alerts must be issued. The problem, along with the solution, must then be communicated to the machine operator to implement repairs.

Revolutionizing Additive Manufacturing

Sigma Labs, with its PrintRite3D® brand, has established a new benchmark in the development and commercialization of real-time computer aided inspection (“CAI”) solutions. Sigma Labs resolves the major roadblocks and costly quality control challenges that impede the 3D manufacture of precision metal parts. The company’s breakthrough computer-aided software product revolutionizes commercial additive manufacturing, enabling non-destructive quality assurance during production, uniquely allowing errors to be corrected in real-time.

Sigma Labs was founded in 2010 by a team of Los Alamos National Labs scientists and engineers to develop and commercially license advanced metallurgical products for the military ordinance, dental implants, and then for additive manufacturing (3D printing). After assessing 3D metal printing technology and the costly, inconsistent quality control issues, Sigma Labs concluded that the enormous potential of 3D metal printing could only scale up if in-process quality-assurance tools were developed to observe, manage and control the manufacturing complexities in such a manner that reliability and repeatability of very high precision quality metal parts could be achieved in the process. Sigma Labs’ patented and third-party validated software has achieved these objectives and now delivers the critical elements needed to unleash the promise of 3D metal printing.

Sigma Labs’ products and services are engineered, manufactured and qualified for use in the highly demanding and hyper precise production environments of the aerospace, defense, transportation, oil and gas, biomedical and other precision-dependent industries.

The Challenge

Additive metal manufacturing combines multiple processes and parts into one single 3D printed part. Due to variances in the additive manufacturing process, parts of consistent quality currently can’t be reliably produced in either large or small quantities without substantial postproduction inspection and rejection costs. Parts are inspected after production using CT scans and other means, so the manufacturer doesn’t know until the very end which of the finished parts meet design specifications. This means lost time, lost profits and inability to economically scale up production.

Innovative Approach

Sigma Labs solves this problem with its patented, in-process quality control technology that informs operators and engineers how to improve both the manufacturing process and quality by capturing meaningful data about inconsistencies in real-time. Sigma Labs is also partnering with OEMs, working toward the visionary introduction of revolutionary closed-loop control that will bypass the machine operator and automatically make in process corrections by reducing machine variations.

Sigma Labs’ next generation technology gives manufacturers the ability to make fast, virtual real-time adjustments so that each finished part is uniform and within critical specifications, thereby improving production quality, decreasing end-users’ risks and waste, and increasing profits and speed to market. Sigma Labs’ PrintRite3D® IPQA Software monitors and assesses the quality of each production part in the 3D additive manufacturing process – layer by layer, and in real-time. This has never been available until now.

Sigma Labs maintains a strong intellectual property portfolio consisting of trade secrets, process know-how and 34 patents either granted, pending or awaiting pre-publication around the globe. These patents encompass the fundamental technologies underlying Sigma Labs’ melt pool process control, data analytics, anomaly detection, signature identification, and future “closed-loop control” of 3D metal printing.

Market Opportunity

Providing advanced quality assurance software to the commercial 3D printing industry is currently a $1.4 billion addressable market expected to grow to $3.9 billion by 2023. Integrating Sigma Labs’ groundbreaking software helps arm the industry with a necessary catalyst to help enable and optimize the fourth industrial revolution in manufacturing.

Sigma Labs’ global client base includes 23 installations across 19 different users. Tier-1 OEM enterprises and end-users such as Siemens, Honeywell, Pratt & Whitney and others are currently evaluating PrintRite3D® for production lines.

Management Team

John Rice, CEO and chairman of the board of directors, has extensive experience as a CEO, lead negotiator, turnaround expert, business financier and crisis management executive/consultant. Prior to becoming chair and CEO of Sigma Labs, he was the CEO of a successful turn-around of a Coca-Cola Bottling Company. Rice has led a variety of companies in diverse business sectors and worked on a host of products and technologies including design and manufacture of high-end jet engine test equipment for the U.S. Airforce, chaff dispensers for F16s, software for modeling naval exercises, software for controlling warehouse distribution systems, medical radioisotopes, cancer detection, and cybersecurity. He is an honor’s graduate of Harvard College.

Darren Beckett, CTO, has over 20 years of experience in the semiconductor industry, including Intel Corporation, where he held various technical and managerial positions. His expertise in process engineering for advanced manufacturing technology includes statistical process control for fabrication of semiconductor devices.

CFO Frank D. Orzechowski also serves as treasurer, principal accounting officer, principal financial officer and corporate secretary. He has more than 30 years of distinguished financial and operational experience. Orzechowski began his career at Coopers & Lybrand in 1982, received his CPA certification in 1984, and received his Bachelor of Science in Business Administration with a major in accounting from Georgetown University in 1982.

Ronald Fisher, vice president of business development, is leading the commercialization of PrintRite3D® 5.0. Fisher is a mechanical engineer with hands-on experience in quality, manufacturing and product development. He has distinguished himself as a lead sales and marketing officer as well as a chief operating officer most recently before joining Sigma in technology startup that grew from market entry to successful exit by merger-acquisition.

For more information, visit the company’s website at www.SigmaLabsInc.com

NOTE TO INVESTORS: The latest news and updates relating to SGLB are available in the company’s newsroom at http://ibn.fm/SGLB

About QualityStocks

QualityStocks is committed to connecting subscribers with companies that have huge potential to succeed in the short and long-term future. It is part of our mission statement to help the investment community discover emerging companies that offer excellent growth potential. We offer several ways for investors to learn more about investing in these companies as well as find and evaluate them.

QualityStocks (QS)
Scottsdale, Arizona
www.QualityStocks.com
480.374.1336 Office
Editor@QualityStocks.com

Please see full terms of use and disclaimers on the QualityStocks website applicable to all content provided by QS, wherever published or re-republished: http://www.qualitystocks.net/disclaimer.php

Archives

Select A Month
  • December 2019
  • November 2019
  • October 2019
  • September 2019
  • August 2019
  • July 2019
  • June 2019
  • May 2019
  • April 2019
  • March 2019
  • February 2019
  • January 2019
  • December 2018
  • November 2018
  • October 2018
  • September 2018
  • August 2018
  • July 2018
  • June 2018
  • May 2018
  • April 2018
  • March 2018
  • February 2018
  • January 2018
  • December 2017
  • November 2017
  • October 2017
  • September 2017
  • August 2017
  • July 2017
  • June 2017
  • May 2017
  • April 2017
  • March 2017
  • February 2017
  • January 2017
  • December 2016
  • November 2016
  • October 2016
  • September 2016
  • August 2016
  • July 2016
  • June 2016
  • May 2016
  • April 2016
  • March 2016
  • February 2016
  • January 2016
  • December 2015
  • November 2015
  • October 2015
  • September 2015
  • August 2015
  • July 2015
  • June 2015
  • May 2015
  • April 2015
  • March 2015
  • February 2015
  • January 2015
  • December 2014
  • November 2014
  • October 2014
  • September 2014
  • August 2014
  • July 2014
  • June 2014
  • May 2014
  • April 2014
  • March 2014
  • February 2014
  • January 2014
  • December 2013
  • November 2013
  • October 2013
  • September 2013
  • August 2013
  • July 2013
  • June 2013
  • May 2013
  • April 2013
  • March 2013
  • February 2013
  • January 2013
  • December 2012
  • November 2012
  • October 2012
  • September 2012
  • August 2012
  • July 2012
  • June 2012
  • May 2012
  • April 2012
  • March 2012
  • February 2012
  • January 2012
  • December 2011
  • November 2011
  • October 2011
  • September 2011
  • August 2011
  • July 2011
  • June 2011
  • May 2011
  • April 2011
  • March 2011
  • February 2011
  • January 2011
  • December 2010
  • November 2010
  • October 2010
  • September 2010
  • August 2010
  • July 2010
  • June 2010
  • May 2010
  • April 2010
  • March 2010
  • February 2010
  • January 2010
  • December 2009
  • November 2009
  • October 2009
  • September 2009
  • August 2009
  • July 2009
  • June 2009
  • May 2009
  • April 2009
  • March 2009
  • February 2009
  • January 2009
  • December 2008
  • November 2008
  • October 2008
  • September 2008
  • August 2008
  • July 2008
  • June 2008
  • May 2008
  • April 2008
  • March 2008
  • February 2008
  • January 2008
  • December 2007
  • November 2007
  • October 2007
  • September 2007
  • August 2007
  • July 2007
  • June 2007
  • May 2007
  • April 2007
  • March 2007
  • February 2007
  • January 2007
  • December 2006
  • November 2006
  • October 2006
  • September 2006
  • August 2006
  • July 2006
  • June 2006
  • May 2006
  • April 2006
  • March 2006
  • January 2006
  • December 2005
  • October 2005
  • September 2005
  • Market Basics

    New to the micro-cap markets?Get answers to your questions about investing in Small-Cap / Micro-Cap Stocks and learn how to protect yourself.

    The Basics

    Newsletter Publishers

    Have an up and coming newsletter and want to be included in our coverage list? Looking to get more coverage and grow subscriptions? Register for coverage.

    Register

    Public Companies

    Are you a Small-Cap / Micro-Cap company looking for coverage? We'd love to hear from you. Fill out our quick contact form or send us a text.

    Get Covered